#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
#
#   HiLiftPW-2 Cp DATA SUBMITTAL FORM Case 1 (Version 1), January 2013
#
#   CASE 1 is a required grid convergence study at high-Reynolds number conditions.
#   Config 2 (without Slat Tracks or Flap Track Fairings) should be used.
#   Two ALPHAs (7 and 16 deg) are required.
#   Four additional ALPHAs (18.5, 20, 21, and 22.4) are optional.
#   This case should be run FULLY TURBULENT (no forced transition).
#
#       NOMENCLATURE:
#              ALPHA:   Angle of attack, deg.
#            X, Y, Z:	Coordinates of each computational point on the pressure cut in mm.
#                 CF:	Skin-friction coefficient at wall = tau_w/(freestream dynamic pressure) 
#      CFX, CFY, CFZ: 	Components of skin-friction coefficient at wall 
#                 CP:	Coefficient of pressure
#                 FT:   Fully Turbulent
#                 TR:   Transition specified or computed
#
#                XXX:	Participant ID (To be assigned by HiLiftPW-1 workshop committee)
#
#             slatXX:   Indicates the slatXX plane, where XX denotes an APPROXIMATE percent of span
#                       (see website for details on how to extract appropriately)
#             mainXX:   Indicates the mainXX plane, where XX denotes an APPROXIMATE percent of span
#             flapXX:   Indicates the flapXX plane, where XX denotes an APPROXIMATE percent of span
#                       (see website for details on how to extract appropriately)
#
#    FLOW CONDITIONS:
#                 Mach Number: 0.175
#             Reynolds Number: 15.1 million (based on MAC)
#             Freestream Temp: 114.0 K (205.2 R)
#  Freestream Static Pressure: 295000 Pa (42.7861 psi)
#
#              NOTES: 1. All numerical data fields can be free-formatted
#                     2. Please use at least 5 decimal places for all numerical values
#                     3. If optional data is NOT provided, please fill data fields with a numerical value of "-999" 
#
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

TITLE = "XXX"

#                            <----- Optional ----->
VARIABLES = "X" "Y" "Z" "CP" "CF" "CFX" "CFY" "CFZ"

# The following section is for ALPHA=7, coarse grid:
ZONE T="XXX slat15 a7 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat29 a7 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat45 a7 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat54 a7 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat68 a7 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat72 a7 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat75 a7 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat82 a7 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat89 a7 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat96 a7 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main15 a7 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main29 a7 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main45 a7 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main54 a7 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main68 a7 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main72 a7 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main75 a7 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main82 a7 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main89 a7 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main96 a7 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap15 a7 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap29 a7 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap45 a7 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap54 a7 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap68 a7 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap72 a7 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap75 a7 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap82 a7 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap89 a7 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap96 a7 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

# The following section is for ALPHA=7, medium grid:
ZONE T="XXX slat15 a7 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat29 a7 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat45 a7 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat54 a7 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat68 a7 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat72 a7 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat75 a7 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat82 a7 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat89 a7 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat96 a7 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main15 a7 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main29 a7 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main45 a7 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main54 a7 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main68 a7 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main72 a7 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main75 a7 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main82 a7 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main89 a7 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main96 a7 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap15 a7 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap29 a7 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap45 a7 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap54 a7 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap68 a7 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap72 a7 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap75 a7 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap82 a7 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap89 a7 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap96 a7 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

# The following section is for ALPHA=7, fine grid:
ZONE T="XXX slat15 a7 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat29 a7 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat45 a7 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat54 a7 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat68 a7 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat72 a7 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat75 a7 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat82 a7 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat89 a7 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat96 a7 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main15 a7 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main29 a7 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main45 a7 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main54 a7 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main68 a7 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main72 a7 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main75 a7 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main82 a7 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main89 a7 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main96 a7 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap15 a7 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap29 a7 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap45 a7 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap54 a7 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap68 a7 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap72 a7 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap75 a7 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap82 a7 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap89 a7 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap96 a7 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

# The following section is for ALPHA=16, coarse grid:
ZONE T="XXX slat15 a16 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat29 a16 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat45 a16 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat54 a16 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat68 a16 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat72 a16 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat75 a16 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat82 a16 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat89 a16 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat96 a16 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main15 a16 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main29 a16 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main45 a16 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main54 a16 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main68 a16 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main72 a16 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main75 a16 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main82 a16 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main89 a16 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main96 a16 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap15 a16 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap29 a16 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap45 a16 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap54 a16 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap68 a16 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap72 a16 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap75 a16 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap82 a16 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap89 a16 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap96 a16 case1 FT coarse no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

# The following section is for ALPHA=16, medium grid:
ZONE T="XXX slat15 a16 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat29 a16 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat45 a16 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat54 a16 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat68 a16 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat72 a16 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat75 a16 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat82 a16 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat89 a16 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat96 a16 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main15 a16 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main29 a16 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main45 a16 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main54 a16 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main68 a16 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main72 a16 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main75 a16 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main82 a16 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main89 a16 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main96 a16 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap15 a16 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap29 a16 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap45 a16 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap54 a16 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap68 a16 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap72 a16 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap75 a16 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap82 a16 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap89 a16 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap96 a16 case1 FT medium no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

# The following section is for ALPHA=16, fine grid:
ZONE T="XXX slat15 a16 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat29 a16 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat45 a16 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat54 a16 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat68 a16 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat72 a16 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat75 a16 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat82 a16 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat89 a16 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX slat96 a16 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main15 a16 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main29 a16 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main45 a16 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main54 a16 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main68 a16 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main72 a16 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main75 a16 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main82 a16 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main89 a16 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX main96 a16 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap15 a16 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap29 a16 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap45 a16 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap54 a16 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap68 a16 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap72 a16 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap75 a16 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap82 a16 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap89 a16 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999

ZONE T="XXX flap96 a16 case1 FT fine no tracks"
 -999 -999 -999   -999   -999 -999 -999 -999