#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
#
# HiLiftPW-3 Force/Moment DATA SUBMITTAL FORM Case 1d (Version 1), March 2017
#
# CASE 1d is an optional case for the HL-CRM configuration - partially-sealed chord flap gap on adapted grid
# (solution should be provided on the final adapted grid)
# Two ALPHAs (8 and 16 deg) are required.
# This case should be run FULLY TURBULENT (no forced transition).
#
# NOMENCLATURE:
# ALPHA: Angle of attack, deg.
# N: Total number of grid points (node-centered code) or grid cells (cell-centered code)
# CL: Coefficient of lift (total)
# CD: Coefficient of drag (total)
# CM: Coefficient of pitching moment about moment reference center (MRC) (total)
# VARCL: Oscillation/variation magnitude in CL (CLmax-CLmin)/2; enter 0 if converged to steady-state
# VARCD: Oscillation/variation magnitude in CD (CDmax-CDmin)/2; enter 0 if converged to steady-state
# VARCM: Oscillation/variation magnitude in CM (CMmax-CMmin)/2; enter 0 if converged to steady-state
# DT: nondimensional time step if run time-accurately (dt*U_freestream/MAC);
# enter -1 if run in steady-state mode (non-time-accurately)
#
# MAC: Mean aerodynamic chord = 275.8 inches
# FT: Fully Turbulent
#
# XXX: Participant ID (To be assigned by HiLiftPW workshop committee)
#
# FLOW CONDITIONS:
# Mach Number: 0.2
# Reynolds Number: 3.26 million (based on MAC)
# Freestream Temp: 518.67 R (= 15.0 C = 59.0 F)
# Freestream Static Pressure: 760.21 mmHg (= 14.70 psi)
#
# NOTES: 1. All numerical data fields can be free-formatted
# 2. Please use at least 5 decimal places in the numerical values for CL CD CM
# 3. If optional data is NOT provided, please fill data fields with a numerical value of "-999"
# 4. If not converged to steady-state, give approximate mean values of CL, CD, and CM
# along with VARCL, VARCD, and VARCM, such that (e.g.) CL +- VARCL describes the variation
#
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
TITLE = "XXX"
VARIABLES = "ALPHA" "N" "CL" "CD" "CM" "VARCL" "VARCD" "VARCM" "DT"
ZONE T="XXX case1d ALPHA=8 FT partialgap"
# adapted grid:
8.0 -999 -999 -999 -999 -999 -999 -999 -999
ZONE T="XXX case1d ALPHA=16 FT partialgap"
# adapted grid:
16.0 -999 -999 -999 -999 -999 -999 -999 -999