#+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
#
#   HLPW-4 Force/Moment Grid Convergence DATA SUBMITTAL FORM Case 1b (Version 2), January 13, 2021
#
#   CASE 1b is a mesh convergence study for the HL-CRM nominal 40/37 configuration at alpha=7.05 deg.
#   For RANS, this case should be run FULLY TURBULENT (no forced transition) in FREE AIR (no tunnel walls).
#
#       NOMENCLATURE:
#                  N:   Number of unknowns (grid points for node-centered code, grid cells for cell-centered code)
#                 CL:	Coefficient of lift (total) - give mean if not converged to steady-state
#                 CD:	Coefficient of drag (total) - give mean if not converged to steady-state
#                 CM:	Coefficient of pitching moment (CMy) about moment reference center (MRC) (total)
#                                                   - give mean if not converged to steady-state
#                 DT:   nondimensional time step if run time-accurately (dt*U_freestream/MAC);
#                         enter -1 if run in steady-state mode (non-time-accurately)
#             TSTART:   if run time-accurately and averaged in time, this is the starting time when time-averaging
#                       began = (time after run initiation)*U_freestream/MAC
#               TAVG:   if run time-accurately and averaged in time, this is the averaging time =
#                       (averaging time)*U_freestream/MAC
#
#                MAC:   Mean aerodynamic chord = 275.8 inches
#                 FT:   Fully Turbulent
#
#                XXX:	Participant ID (To be assigned by HLPW committee)
#
#    FLOW CONDITIONS:
#             Angle of Attack: 7.05 deg
#                 Mach Number: 0.2
#             Reynolds Number: 5.49 million (based on MAC)
#             Freestream Temp: 521 R
#  Freestream Static Pressure: 24.67 psi
#
#              NOTES: 1. All numerical data fields can be free-formatted
#                     2. Please use at least 5 decimal places in the numerical values for CL CD CM
#                     3. If data are NOT provided, please fill data fields with a numerical value of "-999" 
#                     4. If not converged to steady-state (i.e., if run with a scale-resolving simulation
#                        or run time-accurately), give mean values of CL, CD, and CM
#
#+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

TITLE = "XXX"

VARIABLES = "N"   "CL" "CD" "CM"   "DT" "TSTART" "TAVG"

ZONE T="XXX case1b ALPHA=7.05 freeair FT"
# Supply as many lines as grid levels run (e.g, level A, B, ... , F:
  -999   -999 -999 -999   -999 -999 -999
  -999   -999 -999 -999   -999 -999 -999
  -999   -999 -999 -999   -999 -999 -999
  -999   -999 -999 -999   -999 -999 -999
  -999   -999 -999 -999   -999 -999 -999
  -999   -999 -999 -999   -999 -999 -999