#+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
#
#   HLPW-4 DATA SUBMITTAL FORM (Version 2), January 13, 2021
#   Case 3 multielement CRM-HL airfoil VERIFICATION case - PROFILES
#
#   Tecplot data file (if you do not have Tecplot, then provide column data following the format given here)
#
#       NOMENCLATURE:
#                x/c:  x/c location along profile
#                z/c:  z/c location along profile
#             u/Uref:  nondimensional x-component of velocity
#             w/Uref:  nondimensional z-component of velocity
#        mu_t/mu_ref:  nondimentional eddy viscosity
#                  c:  stowed chordlength (=1 in reference geometry provided)
#               Uref:  reference velocity (freestream)
#             mu_ref:  reference dynamic viscosity (freestream)
#
#                XXX:  participant ID (to be assigned by HLPW committee)
#
#    FLOW CONDITIONS:
#                 Mach Number: 0.2
#                       alpha: 16
#             Reynolds Number: 5.0 million (based on stowed airfoil chord)
#             Freestream Temp: 272.1 K
#             This case should be run FULLY TURBULENT (no forced transition).
#
#              NOTES: 1. All numerical data fields can be free-formatted
#                     2. Please use at least 5 decimal places for all numerical values
#                     3. Provide a separate zone for each requested x-location:
#                           along x/c=-0.03 over slat
#                           along x/c=0.4 over main
#                           along x/c=0.95 over flap
#                           (only data above upper surfaces are necessary, but below lower surfaces can be included if desired)
#                     4. Also provide results from your finest 3 grids run:
#                           7 = finest grid
#                           6 = second-finest grid
#                           5 = third-finest grid
#
#+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
TITLE = "turbulence model name inserted here"
VARIABLES = "x/c" "z/c" "u/Uref" "w/Uref" "mu_t/mu_ref"
ZONE T="XXX, slat along x/c=-0.03, grid 7"
x.xxxxxxxx  x.xxxxxxxx  x.xxxxxxxx  x.xxxxxxxx  x.xxxxxxxx

ZONE T="XXX, main along x/c=0.4, grid 7"
x.xxxxxxxx  x.xxxxxxxx  x.xxxxxxxx  x.xxxxxxxx  x.xxxxxxxx

ZONE T="XXX, flap along x/c=0.95, grid 7"
x.xxxxxxxx  x.xxxxxxxx  x.xxxxxxxx  x.xxxxxxxx  x.xxxxxxxx

ZONE T="XXX, slat along x/c=-0.03, grid 6"
x.xxxxxxxx  x.xxxxxxxx  x.xxxxxxxx  x.xxxxxxxx  x.xxxxxxxx

ZONE T="XXX, main along x/c=0.4, grid 6"
x.xxxxxxxx  x.xxxxxxxx  x.xxxxxxxx  x.xxxxxxxx  x.xxxxxxxx

ZONE T="XXX, flap along x/c=0.95, grid 6"
x.xxxxxxxx  x.xxxxxxxx  x.xxxxxxxx  x.xxxxxxxx  x.xxxxxxxx

ZONE T="XXX, slat along x/c=-0.03, grid 5"
x.xxxxxxxx  x.xxxxxxxx  x.xxxxxxxx  x.xxxxxxxx  x.xxxxxxxx

ZONE T="XXX, main along x/c=0.4, grid 5"
x.xxxxxxxx  x.xxxxxxxx  x.xxxxxxxx  x.xxxxxxxx  x.xxxxxxxx

ZONE T="XXX, flap along x/c=0.95, grid 5"
x.xxxxxxxx  x.xxxxxxxx  x.xxxxxxxx  x.xxxxxxxx  x.xxxxxxxx