skip to content

GRIDS DOWNLOAD PAGE, CASE 3

5th AIAA CFD High Lift Prediction Workshop

under constructionPage under construction

 
 
Logo 1 for HLPW-5 Logo 2 for HLPW-5
Logo 3 for HLPW-5

 
 

This page links to downloadable grids (and related information) for HLPW-5. All grids are made publicly available by the originators of the grids. Disclaimer: The grids available for download may or may not be appropriate for your solver, and may or may not be of sufficient density and quality to yield accurate results. You must judge for yourself. Please contact the grid originators if you have any questions about the grids.

Most of the provided grids are "free air" (half-model with symmetry plane in free air). They are given a Mesh Series designation X.a.YY. The X indicates the test case number (1, 2, or 3). The a indicates the grid type (R=fixed-grid RANS, A=ADAPT, H=High-Order, L=HRLES, W=WMLES). The YY is used to order the meshes within a category; these are simply numbers starting at 01 and incrementing up. If any grid series gets superseded by a revision, this will be designated by a (-) in its designation. For example, version 2 would be designated by (2).

In-tunnel grids are indicated with "T" designation at the end.

Note that the mesh sequences have been given somewhat arbitrary labels by their creators regarding their size: sometimes by sequential letter (A, B, C,...), sometimes by increasing number, sometimes by name (e.g., Coarse, Fine), and sometimes by XC,C,M,F. These are all arbitrary designations with little practical meaning, and there is no consistency between different mesh series. Mesh size comparisons should instead be gauged by looking at the README files.

IMPORTANT: Please double-check the BCs in any grid that you download. We have noticed small mistakes/typos/inconsistencies occasionally.

WARNING: Some participants have reported possible issues with CGNS files translated from AFLR3. Please make sure that the boundary patches have the correct BCs associated with them!


 

summary_case3_meshes_for_HLPW5.pdf <- last updated 02/27/2024


 

TEST CASE 3 (Reynolds Number Study on NASA_5.2%-LDG configuration):


 

Return to: Grids Top Page

Return to: High Lift Prediction Workshop Home Page


 

Recent significant updates:
04/10/2024 - Posted 3.W.01 grids
03/31/2024 - Fixed 2 links for CDS_PW_3p0_Lvl-A-ReyNo-16p0M.b8.ugrid.gz and CDS_PW_3p0_Lvl-A-ReyNo-30p0M.b8.ugrid.gz
02/27/2024 - Posted 3.R.02 grids
02/26/2024 - Replaced all 3.H.01 grids
01/24/2024 - Posted additional 3.R.01 grids
12/11/2023 - Posted initial 3.R.01 and 3.H.01 grids

Privacy Act Statement

Accessibility Statement

Responsible NASA Official: Christopher Rumsey
Page Curator: Christopher Rumsey
Last Updated: 04/10/2024